載入中……
[供應]PA6 7335F NC010 含核和潤滑的尼龍
- 產品產地：Zytel
- 產品品牌：Zytel
- 包裝規格：7335F NC010
- 產品數量：200000
- 計量單位：公斤
- 產品單價：0
- 更新日期：2020-12-21 09:31:50
- 有效期至：2021-12-21
-
-
- 收藏此信息
PA6 7335F NC010 含核和潤滑的尼龍
詳細信息
特點：Zytel?PA67335FNC010isanucleated，lubricatedpolyamide6resinforinjectionmolding.
PA67335FNC010含核和潤滑的尼龍
Zytel?PA67335FNC010|PA6NYLONRESIN
Characteristics
RegionalAvailability
NorthAmerica，SouthandCentralAmerica
Processing
InjectionMoulding
Deliveryform
Pellets
Additives
Lubricants，Releaseagent
ProductText
CommonfeaturesofZytel?nylonresinincludemechanicalandphysicalpropertiessuchashighmechanicalstrength，excellentbalanceofstiffnessandtoughness，goodhightemperatureperformance，goodelectricalandflammabilityproperties，goodabrasionandchemicalresistance.Inaddition，Zytel?nylonresinsareavailableindifferentmodifiedandreinforcedgradestocreateawiderangeofproductswithtailoredpropertiesforspecificprocessesandend-uses.Zytel?nylonresin，includingmostflameretardantgrades，offertheabilitytobecoloured.
ThegoodmeltstabilityofZytel?nylonresinnormallyenablestherecyclingofproperlyhandledproductionwaste.Ifrecyclingisnotpossible，DuPontrecommends，asthepreferredoption，incinerationwithenergyrecovery(-31kJ/gofbasepolymer)inappropriatelyequippedinstallations.Fordisposal，localregulationshavetobeobserved.
Zytel?nylonresintypicallyisusedindemandingapplicationsintheautomotive，furniture，domesticappliances，sportinggoodsandconstructionindustry.
Zytel?7335FNC010isanucleated，lubricatedpolyamide6resinforinjectionmolding.
Injectionmolding
PREPROCESSING
Dryingrecommended=Yes，ifmoisturecontentofresinexceedsrecommendedlevel
Dryingtemperature=80℃
Dryingtime，dehumidifieddryer=2-4h
Processingmoisturecontent=<0.2%
PROCESSING
Melttemperatureoptimum=270℃
Melttemperaturerange=260-280℃
Mouldtemperatureoptimum=70℃
Mouldtemperaturerange=50-90℃
MaximumScrewtangentialSpeed:0.4m/s
Flowfrontspeed:150mm/s
Holdpressureoptimum:85MPa
Holdpressurerange:50-100MPa
Backpressure:low
Holdpressuretime:4s/mm
Maximumhold-uptime:15min
POSTPROCESSING
Annealing:30minat170℃
PROPERTIES
Rheologicalproperties
dry/cond
Unit
TestStandard
Rheo
Mouldingshrinkage，parallel
0.6/*
%
ISO294-4，2577
Mouldingshrinkage，normal
0.8/*
%
ISO294-4，2577
Thermalproperties
dry/cond
Unit
TestStandard
Therm
Meltingtemperature，10℃/min
221/*
℃
ISO11357-1/-3
Temp.ofdeflectionunderload，1.8MPa
65/*
℃
ISO75-1/-2
Temp.ofdeflectionunderload，0.45MPa
175/*
℃
ISO75-1/-2
Vicatsofteningtemperature，50℃/h，50N
200/*
℃
ISO306
Coeff.oflineartherm.expansion，parallel
76/*
E-6/K
ISO11359-1/-2
Coeff.oflineartherm.expansion，normal
92/*
同類型其他產品
免責聲明：所展示的信息由企業自行提供,內容的真實性、和合法性由發布企業負責,浙江民營企業網對此不承擔任何保證責任。
友情提醒：普通會員信息未經我們人工認證，為了保障您的利益，建議優先選擇浙商通會員。
浙江民營企業網 www.brightenupmyday.com 版權所有 2002-2010