深圳市文惠機械設備有限公司

特點

▲ 開放式系列工業冷水機是深圳文恵機械設備有限公司的主推產品之一，采用名牌壓縮機及電氣控制元件加工制造，配備高效優質銅管制作之蒸發器和冷凝器，結構緊湊，制冷量高，效率好，易于清洗和維護。
▲ 開放式系列工業冷水機具有多種規格，制冷范圍從2408Kcal/h-175380Kcal/h，凍水溫度范圍調節為5-20℃，特殊要求出水溫度可達到-50℃以下。機組配有熱力膨脹閥、電機過載保護、電源相序保護、高低壓力保護、安全閥等保護裝置，各種部件組合完美，可在實際工況中發揮最大功效、機組廣泛應用于塑膠、電子、化工、電鍍、醫藥、食品等場所。
▲ 此系列機型可定做超低溫型(可低至零下40度)
▲ 水冷式開放式設計，可安裝機房內，無水箱型，具備水冷式箱型機組的優良性能。

▲ Open Series industrial chillers are refrigeration equipment Co.， Ltd. Shenzhen Wenhui‘s main push one of the products， the use of brand-name compressor and electrical control components manufacturing， with production of high quality copper tube evaporator and condenser， compact， high cooling capacity， efficiency， and easy to clean and maintain.
▲ Open-ended series of specifications with a variety of industrial chiller， cooling range from 2408Kcal/h-175380Kcal/h， cold water temperature adjusted to 5-20℃， special requirements can reach -50℃ water temperature below. Unit with a thermal expansion valve， motor overload protection， power supply phase sequence protection， where high and low pressure protection， safety valves and other protective devices， the perfect combination of various components， in real-world conditions to maximize efficiency， the unit is widely used in plastics，electronic， chemical， od and other places.
▲ This series of models can be custom-made ultra-low temperature(as low as minus 40 degrees)
▲ Water-cooled open-design， can be installed inside the room，no water tank type， tank-type water-cooled unit with good performance.