莞市三鼎產品檢測服務有限公司銷售部

UL 817對插頭印字做出的新要求

Subject: 817

February 10， 2014

TO: Subscribers to UL’s Listing and Recognition Service for Cord Sets and Power Supply Cords (ELBZ and ELBZ7)
致：電線組件及插頭線 （ELBZ和ELBZ7）列名及認可服務的客戶

SUBJECT:  Marking Requirement Change for Listed Power Supply Cords
主題：列名電源插頭線的標志變更通知

The purpose of this bulletin is to inform manufacturers of power supply cords of a revised Follow-Up Service marking requirement.
此公告的目的是為了通知插頭線工廠后續跟蹤服務中標識的變動。

The marking requirement described in this bulletin will go into effect on July 1，2015.
標識的修改要求將于2015年7月1日生效。

The instructions in this bulletin supersede the instructions in the Subject 817 FUII dated August 10， 2012. Until formal revisions are made to the FUIIs， please file this bulletin with your Follow-Up Service Procedure.
此通告中的指令將取代2012年8月10日頒布的跟蹤檢驗指引中的指令。在跟蹤檢驗指引作出正式修改前，請將此通告與跟蹤檢驗程序一同存檔。

As part of UL’s goal to continue to improve the integrity of the UL Mark， as part of our enhanced Mark Integrity Program， and to differentiate UL Certified power supply cords from other certifiers， UL will be requiring that the “UL” in a circle be molded on the face (or other surface) of the attachment plug. Having the “UL” in a circle molded on the plug will help to identify that the complete PSC is UL certified.
作為UL持續改善標志完整性目標的一部分，作為增強UL標志完整性的一部分，以及為了使UL認證電源插頭線與其他認證能夠被區分開，UL要求將帶圓圈的UL列名標志模壓到UL插頭上。擁有UL列名標識能夠幫助識別成品的電源插頭線擁有UL認證。
  Users of a PSC where the flexible cord bears the UL Mark could easily assume that the complete PSC is UL Certified， when， in reality， only the flexible cord is certified. It is important that users of PSC can clearly identify that the PSC is UL Certified， especially after the packaging， including the holographic label， has been removed.
現實中，當軟線被認證且標注UL標識時，裝配該軟線的成品電源插頭線很容易被認為是取得了UL認證。那么這個時候，對于電源插頭線的使用者來說，很重要的一點是能夠清楚的區分電源插頭線是否取得了UL認證，特別是在包裝——包括全息UL標簽被移除后。
Please note the use of the “UL” in a circle molded on the attachment plug is in addition to， not in lieu of， the use of the Holographic labels as both are needed as evidence of UL coverage.
請注意，產品打上帶圓圈的UL標志要求是對產品加貼全息UL標簽的增加要求，而非替代要求。此二要求共同作為產品有UL認證的證明。

As this marking change would require tooling modifications， and in some cases your customer’s approval to add the “UL” in a circle to the molds， an 18 months effective date was determined acceptable.

因?yàn)闃?biāo)識變更需要更改模具，以及您的客戶需要承認增加UL標識，所以18個月的生效過渡期是可接受的。

Please feel free to discuss this bulletin with the UL Representative visiting your facility. Should you have any additional questions， please contact the under signed.

Thank you for your continued support of UL’s public safety mission and our efforts to maintain the integrity and value of the UL Mark.